| Brand | Switchgear parts |
| Model NO. | ZMZ High Breaking Intelligent Integration Power Capacitor |
| Rated voltage | 0.45KV |
| Rated frequency | 50Hz |
| Series | ZMZ |
Application
Intelligent measuring and control system
The sampling system of current and voltage adopts 32-bit built-in MCU made by Corex-M4, able to collect the signals quickly, it can realize the high accuracy of measuring three-phase current, voltages, active power, reactive power, transparent power and etc system parameters, calculating and analysis of harmonic waves
Human and machine exchange system
Displaying monitor adopts LCD panel, Chinese menu, display the inner temperature, current, voltage and harmonic parameters at real time, push keys to seek the parameters and running status, also able to set over-voltage, under-voltage, under-current, over-temperature, over/under compensation data, can be saved in case of power failure.
Intelligent connecting with system
Rs485 comm port, built-in MODBUS-RTU protocol, able to realize remotely monitoring and controlling. When several products are connected with system in parallel, they will automatically produce one master machine, the others become the slave machines, forming a reactive power compensation system; if one of machine is out of service it does not influence on others operating, if the master machine exit the working, the system will auto produce a new master machine, highly intelligent operation.
Intelligent switching system
Really switching through zero current, auxiliary transistor circuit is not needed, this system adopts the independent CPU to control the switching operation at passing zero, switching at zero, no surging current, no arcing, fast response, improve the reliability and service life of the equipment.
Power capacitors
Cooperated with high performance power capacitors, good radiation, small size, long service life, consequently it can ensure the complete-set equipment with high safety and reliability
Main Techincal Data
| Category | Item | Specification |
|---|---|---|
| Power Parameters | Rated voltage | AC 400V (deviation ≤±10%, distortion sine wave <5%) |
| Rated current | AC 0 - 5A (current harmonics <10%, Current input impedance ≤0.02 Ω) | |
| Frequency | 50Hz | |
| Power consumption | ＜0.5W | |
| Measurement accuracy | Voltage | ≤ 0.5% |
| Current | ≤ 0.5% | |
| Power | ≤ 0.5% | |
| Power Factor | ± 0.01% | |
| Time | ≤ 100ms | |
| Temperature | ±1℃ | |
| Network | Networking Number | ≤ 128 loops |
| Networking initialization time | ≤ 10s | |
| Environment | Temperature | -30 - + 60℃ |
| Relative humidity | 90% RH (when 20℃ non-condensing) | |
| Switching interval | Single ≥20s (increased when more than one network use) | |
| Capacitors single maximum capacity | Three-phase compensation (30 + 30KVar; single-phase compensation 30KVar) | |
| Capacitors decay rate | ≤0.5%/Year | |
| Capacitor failure rate | ≤5%/Year (Running 60000h) | |
| Allows switching frequency | ≥1 million times | |
| Communication Interface | RS 485, CAN |
Model And Implication
External And Installation Size
| Compensation mode | Model Specification | L | L1 | W | H |
|---|---|---|---|---|---|
| Three-phase compensation (Single) | ZMZ-CS0.45(5) | 405 | 375 | 105 | 315 |
| ZMZ-CS0.45(10) | 405 | 375 | 105 | 315 | |
| ZMZ-CS0.45(15) | 405 | 375 | 105 | 315 | |
| ZMZ-CS0.45(20) | 405 | 375 | 105 | 315 | |
| ZMZ-CS0.45(25) | 405 | 375 | 105 | 315 | |
| ZMZ-CS0.45(30) | 405 | 375 | 105 | 315 | |
| Three-phase compensation (Dual) | ZMZ-CS0.45(5+5) | 405 | 375 | 105 | 315 |
| ZMZ-CS0.45(10+10) | 405 | 375 | 105 | 315 | |
| ZMZ-CS0.45(10+20) | 405 | 375 | 105 | 315 | |
| ZMZ-CS0.45(20+20) | 405 | 375 | 105 | 315 | |
| ZMZ-CS0.45(20+30) | 405 | 375 | 105 | 375 | |
| ZMZ-CS0.45(30+30) | 405 | 375 | 105 | 375 | |
| ZMZ-CS0.45(30+40) | 405 | 375 | 105 | 500 | |
| Single-phase compensation | ZMZ-DF0.25(10) | 405 | 375 | 105 | 315 |
| ZMZ-DF0.25(15) | 405 | 375 | 105 | 315 | |
| ZMZ-DF0.25(20) | 405 | 375 | 105 | 315 | |
| ZMZ-DF0.25(30) | 405 | 375 | 105 | 315 | |
| Mixed compensation | ZMZ-CH/450/5+250/5 | 405 | 375 | 105 | 315 |
| ZMZ-CH/450/10+250/5 | 405 | 375 | 105 | 315 | |
| ZMZ-CH/450/10+250/10 | 405 | 375 | 105 | 315 | |
| ZMZ-CH/450/15+250/15 | 405 | 375 | 105 | 375 | |
| ZMZ-CH/450/20+250/20 | 405 | 375 | 105 | 375 |
-
Relay Protection Basics: Types of Transmission Line Faults and Fundamental Protection Schemes1. Types of Faults on Power LinesPhase-to-Phase Faults: Three-phase short circuit Two-phase short circuitGround Faults: Single-phase to ground fault Two-phase to ground fault Three-phase to ground fault2. Definition of Relay Protection DevicesWhen an abnormality or fault occurs in a component of a power system, relay protection devices are those that can quickly and selectively isolate the faulty or abnormal component from the system, ensuring the continued normal operation of the remaining healLeon09/05/2025 -
5 Common Transmission Line Faults and Effective Prevention Methods1. OverviewA transmission line fault is a sudden power interruption caused by various factors. To restore supply and prevent recurrence, operators must first locate the fault point, identify the type, determine the cause, and implement repairs.The most common faults include: Lightning strikes Ice buildup (icing) Wind deviation (wind sway) Bird-related issues Pollution flashover External damageUnderstanding these faults and their prevention is critical for grid reliability.2. Lightning Strike FauEdwiin09/05/2025 -
Strange Devices on Transmission Lines: 5 Little-Known Practical Functions（1）1 Aviation Warning SpheresAviation warning spheres, also known as reflective safety spheres, are used on overhead transmission lines near airports, especially on extra-high-voltage (above 220kV) lines and river-crossing transmission lines. Highly visible aviation marker spheres (aviation warning spheres) must be installed along the lines to provide warning signals.The aviation marker sphere (aviation warning sphere) has a diameter of ф=600mm. The sphere can be manufactured in various bright coloLeon09/04/2025 -
Transmission LineIn transmission lines, a "π" connection involves breaking the original line from Substation A to Substation B and inserting Substation C, forming a "π" configuration. After the "π" connection, the original single line is divided into two independent transmission lines. Following the "π" connection, Substations B and C may both be powered by Substation A (in this case, Substation C receives power via a feeder from Substation B's busbar, or possibly from another voltage point within Substation B);Encyclopedia09/04/2025 -
What are the principles of forced re-energization of transmission lines?Principles of Forced Re-energization of Transmission LinesRegulations for Forced Re-energization of Transmission Lines Correctly select the forced re-energization end of the line. If necessary, change the connection configuration before forced re-energization, taking into account the reduction of short-circuit capacity and its impact on grid stability. There must be a transformer with its neutral point directly grounded on the busbar at the forced re-energization end. Pay attention to the impactEdwiin09/04/2025 -
Analysis of Accident Handling in Transmission LinesAnalysis of Transmission Line Fault HandlingAs a fundamental component of the power grid, transmission lines are widely distributed and numerous, often exposed to diverse geographical and climatic conditions, making them highly susceptible to faults. Common causes include overvoltage, pollution flashover, insulation damage, tree encroachment, and external damage. Line tripping is one of the most frequent faults in power plant and substation operations, with fault types including single-phase-to-Leon09/04/2025
